Checker Plate Flooring-aluminium floor plate modern and fashionable
Checker plate flooring is also known as tread plate, floor plate, checker plate, checkered plate, checkered floor plate, checker plate and check plate.
Checker Plate has many applications but its main use is for protection. Its decorative and industrial appearance also generates interest with designers and it can often be found included in architecture and the decor of buildings.
It is a very hard wearing and strong grade of aluminum, Alloy 5754, it has excellent corrosion resistance and will withstand sea water and much pollution. Grade 5754 is excellent for welding and cold working.
Floor checker plate is one type checker plate used in floor. The materials are steel checker plate, aluminum checker plate. We can also bar floor plate and flat floor plate.
- Aluminum Floor plate with drilled holes, thickness 4.0 mm.
- Aluminum floor plates alloy rolled elliptical shape with thickness 6.4 mm.
- Plate floor diamond: size 3 mm × 1200 mm × 2400 mm (Thick 2.8 mm), WG 6.12 LBS/feet. MAT'L: CS A-36.
- Plate steel TH 1/4 inch × W 48 inch × L 96 inch, WG 10.20 LBS/feet, MAT'L: ASTM A36, 1/4 inch × 120 × 240 cm.
- Plate Aluminchum, 96 inch × 48 inch × 1/4 inch thick, WG 3.52 LBS/SQ.feet. Material: ASTM B209, GR 606.
- Plate Floor Metal Alum. 3/8 inch thick × 96 inch. Material: ASTM B-GR.606 1-T65.30 LBS/feet. 3/8 inch × 4 feet × 8.
- Plate Aluminchum. 144 inch × 48 inch × 1/8 inch Thick. WG 1.76 LBS/SQ.feet. GR AA5083 OR H32.
- Plate Steel 304SS. 96 inch × 48 inch × 1/4 inch. Material: A240, GR 304SS WG10.20 LLBS/SQ. feet.
Typical applications for Checker Plate:
- Floor Covering for hygiene and slip resistance.
- Wall and column protection to prevent impact damage where hand trucks, trolleys, sack carts are operated.
- Door protection as kick plates or as a full door cladding.
- Commercial vehicle and vans.
- Access ramp covering for wheelchairs.
- Livestock trailer tailgate ramps and flooring.
- Land rover and other 4 × 4 off road vehicle body protection, bonnets, wings, sills, corners, floors, bumpers, mud flaps, door plates, side plates, load area plates.
- Truck Bed Tool Boxes.
- Stair treads, step ladders, walkways.
- Shop front facial for vandal protection.
Metal Sheets stock of plain aluminum sheet comprises mainly of alloy grade 1050. It is commercially pure aluminum and is resistant to chemical attack and weathering. It is easy to cold work and weld.
Checker plate flooring is used extensively in general fabrication and for architectural products such as flashings, pressings because of its ease of fabrication and excellent powder coating qualities.
CPF-01: Checker plate carriage flooring.
CPF-02: Checker plate parking lot flooring.
CPF-03: checker plate elevator flooring.
CPF-04: Checker plate ramp flooring.| Thickness | Weight kg/m2 | Load capacity in kN/m2 for spans in metres | Width (m) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 0.6 m | 0.8 m | 1.0 m | 1.2 m | 1.4 m | 1.6 m | 1.8 m | 2.0 m | |||
| 3 mm | 26.2 | 7.82 | 5.78 | 5.18 | 4.95 | 4.85 | 4.80 | 4.77 | 4.76 | 0.6 |
| - | 3.29 | 2.58 | 2.28 | 2.15 | 2.09 | 2.05 | 2.03 | 0.8 | ||
| 4.5 mm | 37.97 | 26.4 | 19.5 | 17.5 | 16.7 | 16.4 | 16.2 | 16.1 | 16.0 | 0.6 |
| - | 11.1 | 8.7 | 7.70 | 7.26 | 7.05 | 6.92 | 6.86 | 0.8 | ||
| - | - | 5.70 | 4.59 | 4.09 | 3.83 | 3.69 | 3.61 | 1.0 | ||
| 6 mm | 49.74 | 50.9 | 39.2 | 35.7 | 34.4 | 33.8 | 33.4 | 33.3 | 33.2 | 0.6 |
| - | 26.4 | 20.5 | 18.2 | 17.2 | 16.7 | 16.4 | 16.2 | 0.8 | ||
| - | - | 13.5 | 10.9 | 9.68 | 9.08 | 8.74 | 8.55 | 1.0 | ||
| - | - | - | 7.82 | 6.46 | 5.78 | 5.61 | 5.18 | 1.2 | ||
| - | - | - | - | 4.92 | 4.15 | 3.74 | 3.49 | 1.4 | ||
| 8 mm | 65.44 | 90.5 | 69.7 | 63.5 | 61.1 | 60.0 | 59.5 | 59.2 | 59.0 | 0.6 |
| - | 50.9 | 40.9 | 37.0 | 35.3 | 34.4 | 33.9 | 33.6 | 0.8 | ||
| - | - | 32.1 | 25.8 | 22.9 | 21.5 | 20.7 | 20.3 | 1.0 | ||
| - | - | - | 18.5 | 15.3 | 13.7 | 12.8 | 12.3 | 1.2 | ||
| - | - | - | - | 11.7 | 9.85 | 8.85 | 8.26 | 1.4 | ||
| - | - | - | - | - | 7.82 | 6.71 | 6.06 | 1.6 | ||
| - | - | - | - | - | - | 5.49 | 4.78 | 1.8 | ||
| 10 mm | 81.14 | 141 | 109 | 99.2 | 95.5 | 93.7 | 92.9 | 92.4 | 92.2 | 0.6 |
| - | 79.5 | 63.8 | 57.9 | 55.1 | 53.7 | 52.9 | 52.5 | 0.8 | ||
| - | - | 50.9 | 42.1 | 38.2 | 36.2 | 35.0 | 34.4 | 1.0 | ||
| - | - | - | 35.5 | 29.9 | 26.7 | 25.0 | 24.0 | 1.2 | ||
| - | - | - | - | 22.8 | 19.2 | 17.3 | 16.1 | 1.4 | ||
| - | - | - | - | - | 15.3 | 13.1 | 11.9 | 1.6 | ||
| - | - | - | - | - | - | 10.7 | 9.34 | 1.8 | ||